Ubuntu Tips And Tricks

How To Increase Your Internet Connection Speed in Linux

Open a terminal in Linux you can use the combo keys ( Ctrl )+( Alt )+( T )
Open a terminal for wireless enter iwconfig then hit enter. For wired eithernet enter ifconfig & hit enter.
This should display the hardware & location of =
EX =

CODE: SELECT ALL

mi@Mint8-KDEX64 ~ $ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

eth2      IEEE 802.11  Nickname:""
          Access Point: Not-Associated
          Link Quality:5  Signal level:207  Noise level:166
          Rx invalid nwid:0  invalid crypt:0  invalid misc:0

mi@Mint8-KDEX64 ~ $

So here you can see that my wireless adaptor is located @ ( eth2 )
YOURS MAY BE DIFFERENT SUCH AS Wlan0 OR WLAN1, note the location, keep the terminal open.
Then were going to Navigate Open the file as root user with your text editor(gedit,kate,leafpad,Ect. whatever your text editor may be for the relevant desktop version you are using ),The text file we are Going to open is /etc/rc.local
In the open terminal input, or copy & paste this code:

For Gnome
CODE: SELECT ALL

sudo gedit /etc/rc.local

For KDE
CODE: SELECT ALL

sudo kate /etc/rc.local

For LXDE
CODE: SELECT ALL

sudo leafpad /etc/rc.local

Enter your password.(The cursor will not show you entering your password.) This should open the rc.local file as root in the text editor.
Add this exactly. to the end of the list replacing ( wlan0 ) with whatever is in your connection readout previously in the terminal you opened.

CODE: SELECT ALL

iwconfig wlan0 rate 54M

At The End your text file should look like this =

# By default this script does nothing.
iwconfig wlan0 rate 54M
exit 0

Now save the file ( from the text editor drop down menu ) & close the Text editor. Now Close the Terminal.
By adding this to the end of the rc.local file, every time your computer connects to the Internet,It looks for the maximum speed that your connection offers.
Now You Must Reboot your Computer.
This works on all four of my systems I have modified, so far giving me the same speed that I get in Win.
I hope this works as well for you, Comments & suggestions are welcome, Have a Good Day,

Thanks to Jay514 LinuxMint Forum

Install SunFlower 0.1a.42 Twin-Panel File Manager in Ubuntu 12.10/12.04/11.10/Linux Mint 13/12

Sunflower is Open Source, twin panel, small and highly customizable File Manager for Linux with plugins support. Sunflower main purpose is to create powerful and easy use of file manager. Sunflower is developed in python language.

To install SunFlower in Ubuntu/Linux Mint open Terminal (Press Ctrl+Alt+T) and copy the following commands in the Terminal:

sudo add-apt-repository ppa:atareao/sunflower

sudo apt-get update

sudo apt-get install sunflower

How to Make Firefox Faster on Linux Mint

Before making any changes, please make a backup of .mozilla/firefox/--------.default/prefs.js for your own safety. prefs.js is a file that stores all of your history and bookmarks from Firefox.

First open Firefox.

Type "about:config" (without quotes) in the Firefox address bar and then click "Enter". This command opens a configuration page that allows the user to change advanced system settings in Firefox.

Speed up page loading/rendering time in Firefox. Right-click anywhere in the "about:config" window, click on "New" and then select "String". Name the string "nglayout.initialpaint.delay" (without quotes). Enter a value of "0" and then click "OK". This tweak decreases the amount of time Firefox waits to render a page from 250 milliseconds to zero. Make the same process and name the string "content.notify.interval" and enter a value of "0".

Force Firefox to release reserved system RAM when the browser is minimized. Right-click anywhere in the "about:config" window, click on "New" and then select "Boolean". Name the entry "config.trim_on_minimize" (without quotes). Change the value to "True" and then click "OK". This setting forces Firefox to only reserve about 10 MB of system memory while minimized.

Normally Firefox only sends one or two tunnels to the website. However, the more tunnels you use the faster you go. To change this, type in filter bar "network.http.pipelining.maxrequests" and change the value to "150".

Attention: The more tunnels you use, the more bandwidth you use, meaning you could use as tunnels as you want but that would probably kill the sites bandwidth if everyone did that. 150 is a very good value.

Type "network.http.pipelining" in filter bar, and set it to "True" by double clicking it.

Type "network.http.proxy.pipelining" in filter bar, and set it to "True" by double clicking it.

Monitor System Resources in Ubuntu 12.04 LTS

This tutorial shows how to monitor your Ubuntu system resources such as usage of processor, memory, network, hard disk and also cpu/motherboard temperature, cpu fan speed.
There’s a good system load indicator for Ubuntu monitoring cpu usage, cache, memory, network, etc. And psensor is a gtk+ application monitoring temperatures and fan speeds.

1. Install system load indicator

Open up a terminal (Ctrl+Alt+T) and install it from ppa:indicator-multiload/stable-daily. You can use graphical way adding ppa

sudo add-apt-repository ppa:indicator-multiload/stable-daily
sudo apt-get update
sudo apt-get install indicator-multiload

2. Install psensor to monitor temperatures and fan speeds

First install lm-sensor, and start detect hardware sensors:

sudo apt-get install lm-sensors sudo sensors-detect

Install Psensor from this ppa:jfi/ppa

sudo apt-add-repository ppa:jfi/ppa
sudo apt-get update
sudo apt-get install psensor

3. Launch startup applications from the dash, add the two indicator as auto-start at login.
in command area:

system load monitor use indicator-multiload
psensor use psensor

BackBox Linux for Debian/Ubuntu

Ubuntu Natty

You can update your system by adding ppa:backbox/two to your system's software sources.

Step 1 - Open a terminal and enter:

sudo add-apt-repository ppa:backbox/two

Your system will now fetch the PPA's key. This enables your Ubuntu system to verify that the packages in the PPA have not been interfered with since they were built.

Step 2 - Now, as a one-off, you should tell your system to pull down the latest list of software from each archive it knows about, including the PPA you just added:

sudo apt-get update

Now you're ready to start installing software!

Other systems

This PPA also can be added to your system manually by copying the lines below and adding them to your system's software sources.

deb http://ppa.launchpad.net/backbox/two/ubuntu natty main

deb-src http://ppa.launchpad.net/backbox/two/ubuntu natty main

Step 1 - Open a terminal and type:

sudo nano /etc/apt/sources.list

This will open a text editor containing the list of archives that your system is currently using. Scroll to the bottom of the file and paste the lines you copied in the step above. Save the file and exit the text editor.

Step 2 - Now you need to add that key to your system so Ubuntu can verify the packages from the PPA. In your terminal, enter:

sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 78A7ABE1

This will now pull down the PPA's key and add it to your system.

Step 3 - Now, as a one-off, you should tell your system to pull down the latest list of software from each archive it knows about, including the PPA you just added: